When your trying to raise the value of your home it is good to make it look nice. Don’t get me wrong on this please. People know that laminate is a substitute for the Real Deal Hardwood that’s why one house sells for more than the other even if it is next door.

Protecting your investments at the bank is an everyday thing! What about the home investment. If you ever had your house appraised you know exactly what I am talking about. You can have someone come in and he say’s your home is worth this much. Have the same guy come back after making some changes for the better of coarse and he say’s it is worth $30-40,000 more than last month.

There is great insulation that can save you big on energy bills and then there is poor insulation that will cost you money in the long run. A perfect example is comparing R-Values, the R-Values is the best why to save money in the long run.

The best way to increase R-Values is with spray foam insulation. The problem is people don’t know the difference between different types of spray foam. At Abba’s Service we use Tiger spray Foam why? Because it is the best spray foam on the market today! It is waterproof, Fire Rated, Mold and Mildew resistant and works as a solid air barrier.

Sure there are cheaper brands out their but they can not claim the same things that Tiger foam does! There is a reason for the name, The Tiger bits the cold back! It is more expensive but for good reason.1200 sq/ft will cost you around $4000-4500 but it will cut your energy bills at the very least in half. $1500 dollars in energy bills a year to $750 dollars. Insulation is not the place to go cheap by any means. The extra money could be used for the finer things in life like a vacation every year or recouping the funds you spent for all those renovations!

People always ask why should I put a sub floor in my basement. I tell them all the time it is up to them. I explain that if they ever had a flood they would probably save money because the materials are all of the ground. This is another place that customers try and cheap out on all the time, and it seams they end up costing themselves money! In Rigdeway Ontario There has been many cases of people that had renovations done and payed big bucks! When the power went off for 2 weeks back a couple of years ago it cost them big when the sump pump would not work. $60,000 $70,000 gone in a week! I hope that helps! Always spend the extra on a good sub floor period!

When people look at homes they notice the little things that are cheap like cheap tiles. Take a clay tile and compare it to even a cheap marble or granite tile. There is a big difference! Marble say’s expensive, granite the same and what about slate. A good natural stone will increase your purchase price of the material and installation at least 10 times that amount.

OK hardwood or laminate everybody knows the difference and laminate definitely say’s cheap. Could not afford the good stuff, I wonder where else I will have to make improvements. I don’t need to explain this you already know!  visit our web site at http://abbassevice.ca

You can save 50% or more if your home is insulated properly. In Toronto Ontario there are so many homes and business that do not have proper insulation it is unbelievable.

I was just giving an estimate the other day for a condo complex. What most people don’t realize is most insulation breaks down over time. There is ways that you can increase the insulation in those walls without taking the walls down.

Tiger spray foam from Abba’s Service has 2 different types, slow rise for homes with existing walls and fast rise for all other installations!

Slow rise formula can be injected into your walls simply by cutting 7/8 holes in the walls it will completely seal the whole wall cavity. It is expensive but it will save you tons of money over the next couple of years.

Tiger spray foam insulation from Abba’s Service is the best you can buy. It is waterproof, Fire Rated E-84 mold resistant and a vapour barrier. Not to mention it is mold and mildew resistant and will seal every crack even the ones you don’t see. It also works like a sound barrier. If you live in a noisy area we can help you all around.

Many music studios are insulating there walls with spray foam these days! An air tight home will save you a least 50% on your heating bills. It is definitively worth the money Guaranteed. visit or website at http://abbasservice.ca for more complete details.

Regular Batt insulation these days is becoming obsolete. New technology has done some great things in the insulation fields. There is a more than just a few options these days! Inside out side you name the it, it can be insulated.

Maybe you are just looking at tearing the walls down in your home, Wait! Did you know that you can still add spray foam to those walls and then you will have the best. Think about it, Tearing the walls down means new drywall, taping, plaster, vapour barrier and don’t forget the new insulation.

You can cut small holes in the wall and inject it with a spray foam. The only difference is that you need a slow rise formula! Fast rise formula will not do the job because it will adhere to the walls on the way down. The slow rise formula will fall between the walls to the bottom and work it’s way up the wall filling the whole wall. Tiger spray foam comes in fast rise and slow rise. It is a lot easier to spray the walls with the fast rise formula if there is no drywall there in the first place.

There different types of spray foam for many different applications. There is polar foam, Icylene, Tiger foam. They are close to being the same but tiger foam is the best. It is a closed cell process that beat the rest by fare. Polar foam and Icylene are good to but there is a few draw backs. They are not fire Rated and they are made with a  water compound so they are not waterproof. Tiger foam is fire Rated and waterproof it is made totally different. There are many different places that you can use tiger foam that you can not use the others. Like in a pontoon boat. Tiger foam will float, the others will dissipate over a period of time.

At Abba’s Service we will only install the best products for your money. That’s why we use only the tiger foam! It is also environmentally friendly and is energy star rated. Insulating your home with Tiger Spray foam Insulation will save you big on those energy bills there is no doubt about that. The price difference is a little more but it is well worth the money.

Why put a none waterproof, none fire rated product in your home that will not last. Get the best from a contractor that cares for your home as much as you do… Call Abba’s Service today! Or send us an email with your total sq/ft to be done. We will send you an estimate right over the internet and then it is up to you! email abbasservice@bellnet.ca right now by clicking here!

Nobody cleans your furnace the same way Abba’s Service does.  Abba’s Service has been in this industry since 1991. We are experts at helping people save money on there energy bills.

There are companies that are just trying to sell you something and there are parts changers. That is what I call them!

A true heating specialist can tell you ways that will save you money in the long run. A perfect example is duct cleaning.

There is good and bad when it comes to duct cleaning. People have got the shaft by some so called duct cleaning companies. They give you a rate that just is to cheap to turn up!

The average price for a good company to clean your duct system is $250.00 and up. Reputable companies are at least that price. At Abba’s Service we offer a flate rate up to a total of 25 vents. Larger homes are more expensive.

Is there mold in those ducts. Yes you cannot see it but it is there. Lets say you didn’t have your ducts cleaned out and your house has dust flying around.

The air circulates From hot to cold. It comes out one register and returns to the furnace to get either heated or cooled again.

Dust travels through the system and builds up over time. This is standard and why we recommend getting your ducts cleaned every 7 years. BY real professionals. Furnace should be Know more less than every 2 years.

Visit http://abbasservice.ca to view are christmas specials!

There are so many different types of insulation these days that people have a had a hard time choosing the insulation that is necessary for there home. Properly insulating your home will cut your energy bills by at least 30%. In this article I will give try to give you my best advise and explain the differences of each.

First thing is builders always do the minimum  requirements. Pink fibreglass in the walls, cellulose in the attic. Sounds just like your house does it not. Maybe you live in an really old house that does not have any insulation.

Insulation R-Values
Batt types
Pink Fibreglass has an R-value of 3.0-3.7 per sq/in easy to find
Mineral wool same as fibreglass 2.8-3.7 per sq/in
Cotton   3.0-3.7 per sq/in

Loose Fill
Fiberglass 3.0-3.7 per sq/in
Mineral fibre  2.8-3.7
Cellulose fibre 3.0-3.7

Board stock
Type 1 and 11 expanding polystyrene or EPS 3.6-4.4
type 111 and 1V extruded polystyrene or XPS 5
Rigid fibreglass 4.2-4.5
rigid mineral fibre 4.2-4.5
Polyisocyanurate 5.6-7.7

Spray applied
Wet spray cellulose 3.0-3.7
Polystyrene 3.6
Polyurethane 5.8-6.8

These figures are from Insulating your home guide from CMHC!

After understanding that these are the insulation in your walls it is easy to see that the best R-Value for your dollar comes from Polyurethane spray foam injection. It completely fills all cavities and creates an air barrier and vapour retarder. It also works to cut reduction of noise. Many recording studio’s are insulating there walls with polyurethane spray foam.

There are two different types that should be used for residential and commercial applications. You have slow rise and standard, both are different applications. If you already have your walls drywall or plastered with no insulation, you use the slow rise formula, if the walls are open then you would use the standard.

Insulating you home with spray polyurethane will a least double the R-Values of your home. It is easier to do this work with bare walls and a bare attic.

The cost of Tiger spray foam from Abba’s Service is more expensive but it will pay for itself in the long run. It lasts forever and it can not be removed easily.

Cellulose breaks down and shrinks  over time as well as most insulation and is effected with air movement. If you make air movement between your walls disappear then that will save you big. This can not happen unless you use a water resistant fire retarder, vapour barrier type spray foam injection system.

You should have a qualified person installing it. and it will cost you double the amount.

The savings! Remember your home is now air tight, water proofed! You will never loose on you energy bills again. I think you will save about 50% on your energy bills if you insulate the hole house with polyurethane spray foam insulation and I will stand by that. You will see your money saved over the next 5 years and it will be at least the amount of what it cost you in the first place.

Example is 1000sq/ft of foam
1000 sq/ft of spray foam costs $3500 + GST
if it saves you $500 in energy savings every year for 5 years you saved $2500. This is just an example. It is probably more than that I am just talking about the winter. I think you got the picture Now!

Michael Keel from Abba’s Service thanks you for reading this article and would like to invite you to our blog at http://abbasservice.ca for more helpful tips! Click here!

If a contractor that you are going to spend a great deal of money with can’t answer even the basics then he is not a good contractor and you don’t wish to deal with him. At Abba’s Service we welcome all your questions and if I don’t know the answer I will find it out for you!

Most great contractors know a lot about stuff about everything in the renovations field. If he say’s ask the plumber or electrician then he just does not have a clue. He might me good at building walls and drywall but he does not know about anything else.

This is why people like to use smaller renovation guy’s. Price is cheaper also. Remember that a contractor that can do all the work himself and not have to sub anything out is really good. A contractor should be able to answer all your questions form permits to the best way to go about it.

Don’t make mistakes by substituting price for quality! Quality last a long time and if you don’t have the money save it. Another downside is that good contractors are in demand.

When is the best time to book my contractor? NOW! At this time of year some contractors wish to do one more job before the year ends. Most home renovations guy’s know that they have enough work to keep them busy till Dec1/2008.

By booking now! You just might get a deal, or you will be first in line for the next upcoming year.  Makes more sense then trying to find a contractor when everybody is busy. You might even be able to get the best. Big projects take time and should always be planned in advance.

I know at Abba’s Service we stop for only 2 weeks out of the year because I do all my own work. Quality work that will last. Another thing is a contractor should always be there until the job is done. There are things that do come up but don’t get caught with contractor’s that are joggling more than one job at a time! You will tank me latter for that. Call Abba’s Service at 289-321-0348 for your free estimate today… and book NOW! or email us your project abbasservice@bellnet.ca visit our website at http://abbasservice.ca  Click here

When doing basement renovations you should always and I mean always, have a good plan. A Plan should have the following this it! Lighting, walls, bathroom, utility room, storage, family room, and maybe a kitchen and an extra bedroom. Don’t forget sub floor, Insulation, and drains!

Some of these things you probably wont need but that is why you have a plan.

First thing you should do is not the framing, it’s the sub floor. A good sub floor should always be used, why? It will save you money in the future! A good quality sub floor will come in handy when you have one of these problems. Cracks in the foundation or potential cracks if it new construction. Sump pump not working or drains backing up.

If any one of these problems occurs your whole basement renovation would be a waste of time and money. Mold will set in then you will have real problems. It also helps when building walls. The best sub floor that I found is a product that you can at the home depot store. It is wood with a rubber backing on it.

After putting in a good sub floor you are on the way to doing a job like any professional. Companies that don’t put sub floors in when doing a basement renovation are just after your money. They know what can happen in the long run and they think that you will call them again. Abba’s Service always recommends a good quality sub floor even when the customer does not want to pay the extra money. We do explain why. If they still don’t wish to have one, then it is not are problem, it’s there own!

Now it’s time to start building. Got that calk line or soap stone ready. Start by drawing where your walls are going to be, for every room.

After you finish with the layout, get your drill some deck, screws, cutting saw and lots of 2x4s. Start building your walls from the outside walls in covering over each line that you have made. The easy way is to take 2×4 and screw it directly to the sub floor first. Directly above that install a 2×4 on the cross beams and make sure the both are in perfect alignment. Then take another 2×4 and install both ends cutting the extra off so they perfectly between the 2×4 on the ceiling and the floor. The joists should line up perfect and you want to toenail them in. Every to feet. You just built your fist wall! Great job I bet. Now do the rest of the walls the same way.

It is now time to do the electrical. Hopefully you have breakers this would be a lot easier for you to do this your self. Run the wires from the utility room making sure you staple every wire along the way. When cutting in any joist always cut holes with your drill and a hole saw bit. Never notch any beam, make complete circle holes. It will make the beam stronger not weaker.

You should run each wire to a dimmer switch for your lights then run the wires for your pot lights, grounding your dimmer switch and every box. You can run up to 7 pot lights off every switch. I always stay with 4 because it is better for the breaker. Run the wire through the joists and leaving extra wire where you are going to each pot light. All plugs should be on there own breaker and you should run only 4 plugs for every breaker. Remember one pug should always be a GFI on each line and it is usually the first plug. In the Bathroom make this plug a GFI because it is near water and it is code. You should have permits any time you are doing electrical. And have them check it out before you close the walls up.

After installing the wiring it is time for insulation. Make sure all walls and cavities are filled. Best insulation for a basement renovation is spray foam period. If you wish to use the pink stuff it is up to you. After installing the insulation on all the outside walls it is time to install the construction poly. Very important and more than you think, you need that vapor barrier or there will be condensation in the walls in the winter. That is why I like spray foam, it fills every crack and every joint, there will never be a problem with a draft anywhere at anytime. Then with the poly you have the best insulated basement on the block. Don’t forget to tuck tap every joint of the poly!

In the basement do not use regular drywall use the blue stuff. Gypsum board is the best. If you decide to use regular drywall that is up to you. Remember you are already saving a bundle by doing this job yourself, so don’t be cheap! Use drywall screws and make sure they are all indented just a little. Start installing your compound and tape. If the screws are out to fare indent them first. There is nothing worse to see than a screw sticking out of a nice wall. There should be one thin layer of drywall compound under the tape. One thicker layer on top and another layer the next day. Fan the edges towards the middle of the drywall. This will insure you will have a flat wall.

After the drywall is done cut holes for each pot light, and pull the extra wires you left earlier through the holes. Now you can see how this extra wire has worked out for you. Most pot lights come with a template for cutting holes. You can install the light now if you wish. Just don’t put the covers on yet.

Sand all the walls with a fine sanding sponge, you will get tired! After all the walls have been sanded clean all walls with a damp cloth. And shop vac up any drywall dust before priming and painting.

Prime all the walls with Kilz primer. Most people will always use one coat, I say you should use two. It stops the paint from being sucked through the wall. One coat let dry for 1 hour and then the next. Leave one day before you start painting. Don’t worry if the lines are straight or not because it does not matter.

When you paint the next day never go over the same place twice. Paint from the floor to the ceiling in straight lines and come back the next day for the second coat. 2 coats of primer and 2 coats of paint. Your basement is looking just like a professional job right! Think about it, what will it look like with the second coat of paint.

Will in between drying times you might want to get started on the bathroom all the same rules as in the bathroom section but with a twist. Don’t install bathtubs in the basement ever!

I hope that you already have a ruff in for the bathroom then it is easy. To build that really nice standing shower. If not you need a jack hammer to cut through the cement for the drains. In this case make sur that you cut dep enough so there is not a hump in the floor latter. Make the toilet closest to the main drain. The reason for this is if you flush the toilet and it gets plugged up then the paper will plug the shower drain. If the drain for the shower is farther away then it supplies more water for the toilet drain. Your shower will never start to smell.

If your installing a kitchen you should remember to install an exhaust fan and the same for the bathroom. It is code if it is an apartment!  Cabinets for your kitchen should always be fastened to the wall joists and island should be fasted to the floor. All drains need to be put through the cement as well.
Counter tops should be fastened down on top so they don’t move and silicone every joint so water does not get in.

A recap shows your progress. New insulation totally air tight, walls are straight, drywall done, paint done, kitchen done, lights done, paint done, bathroom done, and now the floor.

If you did not use a sub floor you just limited yourself. Stay to tiles and carpet. You might think laminate is ok but your wrong. In about one year or less the moisture from the cement will make it look like hell and you will say I told you so. No sense wasting money remember, you want to last.

If you put a sub floor you can install any type you wish. Even real hardwood. That’s right real hardwood, I bet your happy now! You will need a hammer a block for knocking the floor in place, and a hardwood nailer and air compressor.

You are probably dripping at the mouth right now! Start at one corner in the inner part of the house, and work to the outside walls. A hardwood nailer will do all the work for you so don’t worry. Before install the hardwood install a underlayment that is good quality. Hint if it red color it is the good stuff. The first section should be installed with a brad nailer two shots in every board straight down. These will be the only nails you might see, if you didn’t put them close enough to the edge of the wall. Make sure that the Hardwood Is 1/4 inch off the walls, for movement. Real Hardwood expands and contracts with humidity.

Work in lines up and down the room until you can not get the nailer in the last edge anymore. The rest you can install with a brad nailer the same as the other side.  Make sure all edges are firmly secure.

Now you can instal the baseboards making sure you miter every corner and end. Before you install the baseboards and trim around openings install each door with shims and a level. Make sure all doors are secured to the 2×4 with 3 inch deck screws. Locks handles fixtures should be installed last. Congratulations of your beautiful Basement.

When installing wood always use deck screws, they do not rust and they will last longer so you will ever have to do this job again!

When getting into a bathroom renovation, it is always better to start from scratch! Newer homes are easy if the builders did everything right. Older homes is another story.

In this chapter we will be referring to older homes that are in serious need of help. The reason is if you can do a bathroom renovation in and older home, you can do any home with a lot less work.

First thing you should do is always access the situation. This is a process that can apply to every renovation project that you decide to take on.

Keep in you mind to remember the first rule it is better to start from Scratch. I always tell people they should gut the Bathroom completely.
You probably already knew I would say that so get the hammer, pry bar if you even know what they are, if not stay away from the local hardware store and go straight to the nearest Home Depot or Lowes store.

You bought this book to renovations in your home so you need good tools that you will need for this job and the next.

Take your hammer and start smashing a straight line down the middle of the back walls first, be careful there is wiring and copper pipes behind those walls. Do not even bring a hammer close to a pipe or wire. Use a little pry bar for those area’s.

Then if you should replace the tube so disconnect the drain and the vent cap. If it is a really old tub that is made of cast iron. Buy a Sludge Hammer and smash away and make sure you were your safety goggles.
Don’t leave anything that you can trip over, you will thank me latter for that.

Now that you have a bare naked bathroom. You can check to see if the wiring is old and the plumbing is leaking. If the plumbing looks old change it! If the wiring is old change it! It is always better to start from scratch! Make sure all drains are vented trough the roof because the smell is toxic and you will not be able to live in that house.

99% of the time when a drain has a really bad smell it is because it is not vented or the pipes are old. Older homes didn’t put vents in back more than 25 years ago. Use PVC drain pipe instead of iron our cooper. It lasts forever. Don’t forget the glue!

Wen soldering cooper water lines make sure you use new pipe, not the you got from a friend. Lead free paste and solder, no 50-50 here you are asking for trouble, and it is against code. You solder all pipes to the shower taps and shower head before you can put anything back together.

I always put in shut-off valves on every tap and line. Lets say you have a leak somewhere. The store is closed and you have to shut the water off to the hole house to fix it. Think first, if there is a shut off on every tap they you can isolate the problem area and still have plenty of water. Sounds better does it not.

Wiring is easy if you can remember a few things. Shut power off to any lines you are working on. Run all wires first before you put up the gypsum board. Make sure all wires have merited ends and all have a proper ground, ground the box too. Why not drywall in the bathroom or the green drywall that they say is water proof. Gypsum board is the blue stuff, just in case somebody tells you different. It is water and mildew resistant.

For the shower tile area use Denishield Boards. They are more expensive but they are water resistant and mildew resistant. Better than cement board that falls apart after 10 years. Cement produces moisture.
Make sure that every joint is taped and adhesive.
Now you can start putting the tub first after running the boards all the way to the floor. The tub should always be anchored to the wall.  Hook up drains and use plumbers putty, even if it has a gasket! Now it will never leak. Always check tapes and joints for any leaks before you close up the walls. Sometimes it may drip just a little, redo the job. At least you have a shut off valve this time.

No leaks you are on your way to freedom now! Drains don’t leak taps don’t leak what are you going to fix? TV remote!

If your going to install a standing shower use the kerdi system. It will be the best 600 after tax you ever spent. I personally use this system all the time. Shower boards should be on top of it, not behind like the tub.

Install a water proof membrane for the floor. If the subfloor needs replacing do this before you do anything you heard before. The membrane should be adhesive to the subfloor and allow 24 hours to dry.
Now the hole bathroom is safe and waterproof.

Choose a tile you wish and tile from the tub to the ceiling. Let dry for 24 hrs. Same thing for shower tiles. If you are using heavy tiles use a product that is made for it. When using marble tiles always use white adhesive. Grey adhesive will change the color of the marble!

If you can tile the floor the same day, if you wish but it is always better to do one area first. If you do the floor at the same time do not walk on the floor for 48-72 hrs.

After installing tiles, grout every joint and push the grout all the way to the wall backing board. This will last forever, if you seal the tiles and grout the next day. You can find different types of sealer and cleaners at the home depot store. For marble the adhesive and the sealer should say right on the bottle for marble. If it doesn’t go somewhere else.

After grouting wait about 20-30 minutes and use a lot of clean water, changing it every time it gets really dirty. You should see a light film on the tiles. Before sealing take a dry towel and dust it off, then seal. For marble seal before and after you grout.

Hey that bathroom is starting to look like something special. 24 hrs after that you can install the vanity and toilet, pot lights, vanity lights, mirror. Make sure all pot lights in the bathroom are waterproof pot lights. Yes you can pot them in the shower too. For a tub install a whirlpool tub for two if you can more room the better. Silicone the grout lines at the lowest joints and everywhere you think water might get in and cause damage.

Congratulations! You now have a spa bathroom remember to install glass shower doors at the end.

There is a reason why we have won awards and it’s not because we don’t care about our clients. We wish you would use our company for all your home renovation projects. No matter how big or how small!
Click on link provided http://abbasservice.ca to visit are web site. we only have 5 of them!